Shelves are furnished with a 1 1/2″ sanitary downward roiled rim with a 1″ turn-up on sides and rear. Shelf and bracket are die stamped and constructed from 18 gauge stainless steel. Unit is easily assembled employing a slip-fit design. Units ship knocked down. Hardware for wall mounting not provided.

MEASUREMENTS

MODEL# WS-24….. 11 1/8” x 24”

MODEL # WS-36….. 11 1/8” x 36”

MODEL # WS-48….. 11 1/8” x 48”

MODEL # WS-60….. 11 1/8” x 60”

16 gauge 304 stainless steel solid shelving mount with stainless steel tubing through table top to maintain overall dimensions of table. Adjustable shelving is supplied with 60″ tubes as standard. Front of shelves are rounded, with a 1 1/2″ turn-up on rear edge. Mid mount or rear mount available. Custom height requirements, electropolishing and additional side turn-ups available.

** Be sure to order both mounting provision accessories and required number of shelves with each table.

Recommended weight capacity 50 lbs/sq. ft. for all tables four feet in length and under.

Recommended weight capacity 25 lbs/sq. ft. for all tables over four feet in length.

18 gauge stainless steel or galvanized steel. Weight capacity = 20 lbs. per linear foot.

Floor standing cabinet features a five shelf design to accommodate clean room garments. 316L stainless steel construction provides a stable, attractive and easy-to-clean cabinet. Full length doors offer accessibility. Available with key lock handle.

Available with keylock handle. Both Standard and Custom configurations available.

This unit combines the features of the LFI Garment Cabinet with the flexibility of a convenient hanging rod to maximize garment storage options. 316L stainless steel construction, reinforced doors.

Available with keylock handle. Both Standard and Custom configurations available

Free-standing garment racks are constructed from 16 gauge 304 stainless steel tubing. Cross bracing provides stability with the use of elbow brackets. Space saving design allows for a 24″ width. Hanger locators are scored on 2″ increments to provide maximum storage capacity for cleanroom apparel. Each unit comes with twelve electropolished close looped hangers, which slide onto the hanger bar during assembly.

Includes 12 close loop hangers. Overall Height 74″

These cleanroom benches are constructed from 16 gauge 304 stainless steel. Seating height is 18″ above finished floor. 12″ wide seats have rounded front and back edges for comfort. Seat sides are flat and turned down on a 90° angle for alignment with walls or additional units. Unique rainbow legs allow for even distribution of weight load. Plastic bullet feet standard, stainless steel flange feet for floor mounting optional.

Includes 12 close loop hangers. Overall Height 74″

Wall mounted garment racks are constructed from 16 gauge 304 stainless steel tubing. Tubular shelf provides extra storage space and allows free flow of air. Ideal for freeing up areas for floor storage. Each unit comes with stainless steel wall flanges for wall mounting.

Includes 12 close loop hangers. Overall Height 18″

Enclosed base worktable with hinge doors are constructed with a 14 gauge 304 stainless steel top and an 18 gauge 304 stainless steel body. Top has a 1 5/8″ sanitary rolled rim on front edge for worker comfort. Sides and rear edge are flat and turned down on 90 degree angle for alignment with walls or additional equipment. Door interiors have a double panel for extra rigidity. Adjustable 1” metal bullet feet standard. 35 ½” standard working height.

Enclosed base worktables with sliding doors are constructed with a 14 gauge 304 stainless steel top and an 18 gauge 304 stainless steel body. Top has a 1 5/8″ sanitary rolled rim on front edge for worker comfort. Sides and rear edge are flat and turned down on a 90 degree angle for alignment with walls or additional equipment. Adjustable 1” metal bullet feet standard. 35 ½” standard working height.

Choose these mobile drawer cabinets to complete two tasks – as a sanitary storage unit and as a mobile workstation. Unit tops are constructed from 14 gauge 304 stainless steel and feature a die embossed counter top edge to prevent spills. Large capacity drawers have ball bearing slides for easy mobility. Four 5” swivel casters provide mobility; two casters with brakes for stabilizing.

Our utility cart is constructed from heavy gauge stainless steel. 4″ casters provide easy mobility. Each unit has three die formed adjustable shelves with counter top edges on all sides. Weight capacity 150 lbs. Set of four 4” swivel casters includes two casters with brakes and 4 donut bumpers. Units ship knocked down and assemble with provided hardware. Chrome posts. Overall height 38”, including casters.

Floor standing storage cabinet features all 316L stainless steel construction. A sloped perforated top and perforated shelves ensure free airflow throughout the cabinet. Adjustable shelving is standard and allows for maximum storage flexibility. Shelves are also available without perforations depending upon storage requirements. A full length view panel window is standard in each door.

Both Standard and Custom configurations available.

Unique design allows for all 316L stainless steel paneled construction with all welds ground smooth pulling drawers. Stainless steel rollers are utilized to eliminate shedding of roller material and provide effortless, quiet operation. Two and four drawer units are available. The unique drawer design eliminates the need to use a separate hanging file frame.

Both Standard and Custom configurations available.

Stainless steel wall cabinets have a welded mid shelf and sloping top to enhance sanitary configuration. Units are constructed from 18 gauge stainless steel. Stainless steel hinges and handles. Hardware for wall-mounting not provided.

Available in three options: WCS – Sliding Door, WCO – Open Door & WCH – Hinged Door