About Portable Clean Rooms

Portable Clean Rooms are self-contained systems available with many options including (but not limited to) custom size, electrical configuration, with or without casters, and specified filter sizes. PCRs can be supplied with either HEPA or ULPA filters for ISO 5 or ISO 4 applications. Supply air for the unit is provided through a grille on the top of the PCR with optional pre-filtration. PCRs are configured according to customer specifications although standard sizes are available. Our patented construction ensures long-term, low-maintenance and reliable operation.

LFI’s PCR is a completely self-contained system utilizing patented welded construction. Systems are fabricated entirely from heavy-duty 14 and 16 ga 304/304L or 316L stainless steel with a #4 polished finish. Exterior welds are kept to a minimum and ground smooth and polished. Continuously welded and formed patented filter grid ensures a completely self-contained leak-free system. 1-piece formed light channels are recessed and continuously welded to the filter grid. Stainless steel perimeter tubing allows for curtain installation without penetrating the filter plenum.


LFI T-Grid Portable Clean Room Series

Ultimate flexibility in providing clean areas in a non-cleanroom environment using LFI 2×4 FBM Modules in a T-Grid formation with stainless steel support tubing. FBM units of 304 or 316L stainless steel with panelized weld construction. Final filters HEPA at 99.99% efficiency, rated at 0.3 microns, or ULPA at 99.9995% efficiency, rated at 0.12 microns installed with gel seal technology to LFI’s patented knife edge design to assure a leak proof fit. Variable speed controls, minihelic gauges to monitor system pressure, 120V/1/60Hz electrical system lights.

Options: PVC curtains or Plexiglas side panels, leg levelers or cleanroom casters.

Available in standard & custom configurations. All units are fully factory tested and certified at our facility and include a comprehensive manual for your IQ,OQ SOP in electronic format.

LFI Series 3000 PCR Recirculating

The LFI PCR Recirculating clean room is designed to be installed in areas where at least ISO 5 must be achieved. A self-contained system constructed of 304 or 316L 14 & 16 GA stainless steel with panelized construction and internal welds. LFI’s patented continuously welded knife edge combined with gel seal technology assures a leak proof design. 11GA stainless steel support legs with heavy duty stainless steel casters. Final filters Gel Seal 99.99% efficient to 0.3 microns or 99.9995% to 0.12 microns. Internal baffles to provide even airflow. Photohelic gauge to monitor system pressure, controls and Hi/Low Pressure Alarms located in blower plenum. 115/1/60Hz thru 460/3/60Hz electrical configurations. Clear PVC strip curtains. Recessed T8 or Teardrop lighting. Available in standard and custom sizes.

Available in standard & custom configurations. All units are fully factory tested and certified at our facility and include a comprehensive manual for your IQ,OQ SOP in electronic format.

LFI Series 3000 PCR Portable Clean Room

The LFI PCR is the ultimate combination of function and portability in a classified space. Providing better than a class ISO 5 area. This portable clean room adds 11GA stainless steel support legs with cleanroom casters for a truly flexible solution. Systems are completely wired; and once received can be set up within hours. Constructed of 304 or 316L 14 & 16 GA stainless steel with panelized construction and internal welds. Laminar Flow, Inc.’s patented continuously welded knife edge combined with gel seal technology assures a leak proof design. 11GA stainless steel support legs with heavy duty stainless steel casters. Final filters Gel Seal 99.99% efficient to 0.3 microns or 99.9995% to 0.12 microns. Photohelic gauge to monitor system pressure, controls and Hi/Low Pressure Alarms located in blower plenum. 115/1/60Hz thru 460/3/60Hz electrical configurations. Clear PVC strip curtains. Recessed T8 or Teardrop lighting. Available in standard and custom sizes.

Available in standard & custom configurations. All units are fully factory tested and certified at our facility and include a comprehensive manual for your IQ,OQ SOP in electronic format.

Controls & Features:

Product Options:

Electrical:

  • Entire unit is constructed of 304/304L or 316L stainless steel
  • Integrated controls with multiple options
  • 120V or 240V versions available with matching plug
  • LED Lighting, 4000K
  • Internal baffles to provide 90 fpm ± 20% on average
  • Injection and sample ports
  • HEPA plenum pressure monitoring
  • Visual/audible alerts for low and high pressure
  • BAS feedback for remote monitoring
  • 99.999% HEPA gel seal removable room side
  • Perforated S/S removable HEPA screens 40% open
  • High Efficiency EC Motor/Blowers
  • Custom configuration sizes
  • Standard Sizes Available
  • Casters
  • High CRI dimmable LED lighting
  • BAS/BMS monitoring and controls
  • ULPA 99.9995% Filters
  • Color touchscreen PLC/HMI for controls and Diagnostics
  • Standard or Non-static clear PVC curtain strip
  • EC Blowers
  • Registered UL508a facility
  • All UL or ETL components are used
  • All wiring in accordance with UL Guidelines