Clean Room Furniture

Laboratory Furniture Innovators and its parent company Laminar Flow Inc. have established a reputation since 1969 for providing high quality, practical and cost effective solutions for applications requiring both clean and aseptic environments. Our combined product lines run the full spectrum of equipment and furniture designs for the most demanding laboratory, sterile suite or clean room.

Our over 40 years of precision sheet metal manufacturing experience, combined with our innovative design and engineering staff, enables us to meet the most stringent performance specifications and complex project requirements. All of our products manufactured from 304 or 316 as either our standard sizes or per your specific requirements.

For more details, please contact us at 1-800-553-3569 and request our complete catalog. Plan to use our expertise and superior customer service on your next project.

Thank you for your interest in Laboratory Furniture Innovators.



Gowning Benches – SGB Series


These cleanroom benches are constructed from 16 gauge 304 stainless steel. Seating height is 18″ above finished floor. 12″ wide seats have rounded front and back edges for comfort. Seat sides are flat and turned down on a 90° angle for alignment with walls or additional units. Unique rainbow legs allow for even distribution of weight load. Plastic bullet feet standard, stainless steel flange feet for floor mounting optional.

Model No. W L H
SGB-3 12" 26" 18"
SGB-4 12" 48" 18"
SGB-5 12" 60" 18"
SGB-6 12" 72" 18"
SGB-7 12" 84" 18"
SGB-8 12" 96" 18"



ACCESSORIES

DESCRIPTION MODEL #
Special Modification Charge GA-10
Stainless Steel Flanged Feet GA-11 ea.
Plastic Bullet Feet (replace.) GA-12 ea.
Electropolish Finish (Ra~10) GEA-100 lin./ft.
Welded Setup GA-14

Garment Rack, Free Standing – FSG Series


Free-standing garment racks are constructed from 16 gauge 304 stainless steel tubing. Cross bracing provides stability with the use of elbow brackets. Space saving design allows for a 24″ width. Hanger locators are scored on 2″ increments to provide maximum storage capacity for cleanroom apparel. Each unit comes with twelve electropolished close looped hangers, which slide onto the hanger bar during assembly.

Includes 12 close loop hangers. Overall Height 74”

Model No. W L H
FSG-4 24" 48" 21"
FSG-5 24" 60" 27"
FSG-6 24" 72" 33"
FSG-8 24" 96" 39"



ACCESSORIES

DESCRIPTION MODEL #
One Dozen Stainless Steel Close Looped Hangers GH-12
Stainless Steel Flange Feet (FGR Only) BA-11 each

Garment Rack, Wall Mount – WR Series


Wall mounted garment racks are constructed from 16 gauge 304 stainless steel tubing. Tubular shelf provides extra storage space and allows free flow of air. Ideal for freeing up areas for floor storage. Each unit comes with stainless steel wall flanges for wall mounting.

Includes 12 close loop hangers. Overall Height 18”.

Model No. W L H
WR-4 18" 48" 21"
WR-5 18" 60" 27"
WR-6 18" 72" 33"
WR-8 18" 96" 39"

Stainless Steel Tables – STS Series


STS tables are ideal for pharmaceutical plants and other operations requiring stainless steel tables in the production area. These solid top tables with undershelves are constructed with 14 gauge type 304 series stainless steel tops and 18 gauge type 304 series stainless steel undershelves. Stainless Steel


Table Mounted Shelving – TS Series


16 gauge 304 stainless steel solid shelving mount with stainless steel tubing through table top to maintain overall dimensions of table. Adjustable shelving is supplied with 60″ tubes as standard. Front of shelves are rounded, with a 1 1/2″ turn-up on rear edge. Mid mount or rear mount available. Custom height requirements, electropolishing and additional side turn-ups available.

** Be sure to order both mounting provision accessories and required number of shelves with each table.

MODEL # MOUNTING PROVISION

  • TS-228 Mid-Mount Tubes
  • TS-229 Rear-Mount Tubes

MID-MOUNT REAR-MOUNT

MODEL # SHELF SIZE
TS-12-36 12"x36"
TS-12-48 12"x48"
TS-12-60 12"x60"
TS-12-72 12"x72"
TS-12-96 12"x96"
TS-12R-36 12"x36"
TS-12R-48 12"x48"
TS-12R-60 12"x60"
TS-12R-72 12"x72"
TS-12R-96 12"x96"

Solid Top Worktables – STH Series


Choose these solid top worktables constructed from 16 gauge 304 stainless steel for cleanrooms with a Class 100-100,000 rating. Sturdy solid tops are reinforced with welded stainless steel hat channels. The front and rear edge of each table has a die formed rounded edge for worker comfort. Each table has flat sides for easy alignment in cleanroom areas where conserving space is a priority. Stainless steel understructure has center crossbracing to maintain rigidity. Adjustable 1” plastic bullet feet standard. Recommended weight capacity 50 lbs/sq. ft. for all tables four feet in length and under. Recommended weight capacity 25 lbs/sq. ft. for all tables over four feet in length. Standard Working Height is 30”.

NOTE: All 48” wide tabletops are constructed from 14 GA 304 SS.

MODEL # Dimensions
STH-244 24” x 48” x 30”
STH-245 24” x 60” x 30”
STH-246 24” x 72” x 30”
STH-248 24” x 96” x 30”
STH-300 30” x 30” x 30”
STH-304 30” x 48” x 30"
STH-305 30” x 60” x 30”
STH-306 30” x 72” x 30”
STH-308 30” x 96” x 30”
STH-364 36” x 48” x 30”
STH-354 36” x 60” x 30”
STH-366 36” x 72” x 30”
STH-368 36” x 96” x 30"
STH-485 *48” x 60” x 30”
STH-486 *48” x 72” x 30”
STH-488 *48” x 96” x 30”


ACCESSORIES

DESCRIPTION MODEL #
Drawer with Enclosure 15” x 20” x 5” TH-2015
Stainless Steel Flange Foot TH-19
Welded and Crated Setup TH-23
5” Cleanroom Conductive Casters TH-25
Special Working Height TH-33
Special Modification Charge TH-61
Electropolish Finish (Ra~10) TH-100 lin./ft.
Solid Keyboard Drawer (solid top tables only) TH-101
Cleanroom Comp. Leg Assembly TH-102
Cross Bracing Modification TH-104

Stainless Steel Tables – STST Series


STST series tables have a stainless steel top and rear cross bracing under-structure. All other features and accessories are identical to the STS series.

LFI Workcenter


The LFI Workcenter constructed of 316L stainless steel #4 finish features a sloped workdeck and a spacious 23″W x 23″D x 45/8″H drawer that is lockable. Sanitary levelers are adjustable a full 1″. A sturdy 11/2″ square support stand is available. A wall bracket for wall mount constructed of welded tubing is available.

MODEL# SIZE W L H

  • LFIWCS 36” x 25” x 51” stand mount
  • LFIWCM 36” x 25” x 16“ wall mount

Enclosed Base Worktables with Sliding Doors – BS Series


Enclosed base worktables with sliding doors are constructed with a 14 gauge 304 stainless steel top and an 18 gauge 304 stainless steel body. Top has a 1 5/8″ sanitary rolled rim on front edge for worker comfort. Sides and rear edge are flat and turned down on a 90 degree angle for alignment with walls or additional equipment. Adjustable 1” metal bullet feet standard. 35 ½” standard working height.

FLAT TOP
MODEL# LENGTH 24” WlDE 30” WIDE

  • 4’ BS-SS-244 BS-SS-304
  • 5’ BS-SS-245 BS-SS-305
  • 6’ BS-SS-246 BS-SS-306
  • 7’ BS-SS-247 BS-SS-307
  • 8’ BS-SS-248 BS-SS-308
  • 10’ BS-SS-2410 BS-SS-3010

5” SPLASH
MODEL# LENGTH 24” WlDE 30” WlDE

  • 4’ BSS-SS-244 BSS-SS-304
  • 5’ BSS-SS-245 BSS-SS-305
  • 6’ BSS-SS-246 BSS-SS-306
  • 7’ BSS-SS-247 BSS-SS-307
  • 8’ BSS-SS-248 BSS-SS 308
  • 10’ BSS-SS-2410 BSS-SS-3010

Enclosed Base Worktables with Hinged Doors – BH Series


Enclosed base worktable with hinge doors are constructed with a 14 gauge 304 stainless steel top and an 18 gauge 304 stainless steel body. Top has a 1 5/8″ sanitary rolled rim on front edge for worker comfort. Sides and rear edge are flat and turned down on 90 degree angle for alignment with walls or additional equipment. Door interiors have a double panel for extra rigidity. Adjustable 1” metal bullet feet standard. 35 ½” standard working height.

FLAT TOP
MODEL# LENGTH 24” WlDE 30” WIDE

  • 4’ BS-SS-244 BS-SS-304
  • 5’ BS-SS-245 BS-SS-305
  • 6’ BS-SS-246 BS-SS-306
  • 7’ BS-SS-247 BS-SS-307
  • 8’ BS-SS-248 BS-SS-308
  • 10’ BS-SS-2410 BS-SS-3010

5” SPLASH
MODEL# LENGTH 24” WlDE 30” WlDE

  • 4’ BSS-SS-244 BSS-SS-304
  • 5’ BSS-SS-245 BSS-SS-305
  • 6’ BSS-SS-246 BSS-SS-306
  • 7’ BSS-SS-247 BSS-SS-307
  • 8’ BSS-SS-248 BSS-SS 308
  • 10’ BSS-SS-2410 BSS-SS-3010

Mid Shelves and Undershelves


18 gauge stainless steel or galvanized steel. Weight capacity = 20 lbs. per linear foot

FT MODEL# - 24" WIDE MODEL# - 30" WIDE MODEL# - 36" WIDE
2' US-24-24 US-30-24 --
2 1/2' US-24-30 US-30-30 --
3' US-24-36 US-30-36 US-36-36
4' US-24-48 US-30-48 US-36-48
5' US-24-60 US-30-60 US-36-60
6' US-24-72 US-30-72 US-36-72
7' US-24-84 US-30-84 US-36-84
8' US-24-96 US-30-96 US-36-96
9' US-24-108 US-30-108 US-36-108
10' US-24-120 US-30-120 US-36-120
11' US-24-132 US-30-132 US-36-132
12' US-24-144 US-30-144 US-36-144

Wall Shelving – WS Series


WS shelves are furnished with a 1 1/2″ sanitary downward roiled rim with a 1″ turn-up on sides and rear. Shelf and bracket are die stamped and constructed from 18 gauge stainless steel. Unit is easily assembled employing a slip-fit design. Units ship knocked down. Hardware for wall mounting not provided.

MODEL# SIZE
WS-24-11 1/8” x 24”
WS-36-11 1/8” x 36”
WS-48-11 1/8” x 48”
WS-60-11 1/8” x 60”

LFI Wall Cabinets – WC Series


Stainless steel wall cabinets have a welded mid shelf and sloping top to enhance sanitary configuration. Units are constructed from 18 gauge stainless steel. Stainless steel hinges and handles. Hardware for wall-mounting not provided.

Available in three options: WCS – Sliding Door, WCO – Open Door & WCH – Hinged Door



WCS Series

L Sliding Door Unity # of Doors Wt. Cu.
35' N/A N/A N/A N/A
48' WCS-15-48 2 155 lbs. 21
60' WCS-15-60 2 155 lbs. 25
72' WCS-15-72 2 220 lbs. 31
96' WCS-15-96 4 296 lbs. 41


WCO Series

L Open Door Unit Wt. Cu.
35' WCO-15-35 95 lbs. 17
48' WCO-15-48 120 lbs. 21
60" WCO-15-60 145 lbs. 25
72" WCO-15-72 180 lbs. 31
96" WCO-15-96 240 lbs. 41


WCH Series

L Hinged Door Unit # of Doors Wt. Cu.
35' WCH-15-35 2 120 lbs. 17
48' WCH-15-48 2 150 lbs. 21
60" WCH-15-60 2 180 lbs. 25
72" WCH-15-72 th4 240 lbs. 31
96" WCH-15-96 4 320 lbs. 41

LFI Flow-Thru Storage Cabinet – FTC Series


Floor standing storage cabinet features all 316L stainless steel construction. A sloped perforated top and perforated shelves ensure free airflow throughout the cabinet. Adjustable shelving is standard and allows for maximum storage flexibility. Shelves are also available without perforations depending upon storage requirements. A full length view panel window is standard in each door.

Both Standard and Custom configurations available.

MODEL# SIZE (W x D x H)
LFIFTC-256 24” x 13” x 60”
LFIFTC-326 36” x 22” x 60”
LFIFTC-257 24” x 15” x 72”
LFIFTC-327 36” x 22” x 72”

LFI Combination Garment Cabinet – GC Series


This unit combines the features of the LFI Garment Cabinet with the flexibility of a convenient hanging rod to maximize garment storage options. 316L stainless steel construction, reinforced doors.

Available with keylock handle. Both Standard and Custom configurations available.

MODEL# SIZE (W x D x H)
LFIGC-382 36” x 18” x 72”
LFIGC-342 36” x 24” x 72”
LFIGC-388 36” x 18” x 78”
LFIGC-348 36” x 24” x 78”

LFI Combination Garment Cabinet – G Series


Floor standing cabinet features a five shelf design to accommodate clean room garments. 316L stainless steel construction provides a stable, attractive and easy-to-clean cabinet. Full length doors offer accessibility. Available with key lock handle.

Available with keylock handle. Both Standard and Custom configurations available.

MODEL# SIZE (W x D x H)
LFIG-382 36” x 18” x 72”
LFIG-342 36” x 24” x 72”
LFIG-388 36” x 18” x 78”
LFIG-348 36” x 24” x 78”

LFI File Cabinet


Unique design allows for all 316L stainless steel paneled construction with all welds ground smooth pulling drawers. Stainless steel rollers are utilized to eliminate shedding of roller material and provide effortless, quiet operation. Two and four drawer units are available. The unique drawer design eliminates the need to use a separate hanging file frame.

Both Standard and Custom configurations available.

MODEL# SIZE (W x D x H)
LFI2D 15” x 24” x 27”
LFI4D 15” x 24” x 52”

Mobile Drawer Cabinet – MDC Series


Choose these mobile drawer cabinets to complete two tasks – as a sanitary storage unit and as a mobile workstation. Unit tops are constructed from 14 gauge 304 stainless steel and feature a die embossed counter top edge to prevent spills. Large capacity drawers have ball bearing slides for easy mobility. Four 5” swivel casters provide mobility; two casters with brakes for stabilizing.

Model # SIZE (L x W x H) Drawers Drawer Size
MDC-2020 25 ¼” x 25 ¾” x 29 ½” 3 20” x 20”
MDC-4-2020 25 ¼” x 25 ¾” x 36 3/8” 4 20” x 20”
MDC-2015 25 ¼” x 21 ¾” x 29 ½” 3 20” x 15”
MDC-4 2015 25 ¼” x 21 ¾” x 36 3/8” 4 20” x 15”

Utility Cart


Our utility cart is constructed from heavy gauge stainless steel. 4″ casters provide easy mobility. Each unit has three die formed adjustable shelves with counter top edges on all sides. Weight capacity 150 lbs. Set of four 4” swivel casters includes two casters with brakes and 4 donut bumpers. Units ship knocked down and assemble with provided hardware. Chrome posts. Overall height 38”, including casters.

Model # Overall Size (incl handle) Shelf Size
UC-17 34 ½”L x 18”W 27”L x 17”W
UC-21 40 ½”L x 24”W 33”L x 21”W
UL Label

Product Lines You Can Trust